Essential details
Shipping:Express Delivery
Product Introduction
Technical Specification of TM-60 Two-Station Pipe End Forming Machine
I Performance Characteristics:
The automatic hydraulic two-station pipe end forming machine adopts a microcomputer-controlled power system, and the setting and operation are simple and easy to understand.
The mobile foot switch has three functions: automatic, emergency stop and continuous stop after tight stop, with high safety.
According to requirements, various forming molds can be equipped to complete various pipe end shapes such as sheep head pipe reduction, pipe expansion, pleating and pipe.
The mold replacement is simple and convenient for elastic production.
The hydraulic system adopts a centralized control circuit of oil pressure valves, which can extend the service life of the components of each machine drive mechanism. The multi-stage mailbox design combined with the large-capacity water cooling circulation system makes the machine operate more stably.
The automatic hydraulic pipe end forming machine uses linear guides as the carrier, ensuring no wear during operation and good product repeatability. It is suitable for the treatment of piers in automotive parts, furniture, air conditioners, and fuel pipelines
The usage conditions and power supply part of the pipe end forming machine:
1) Ambient temperature :0-45 degrees. The machine operates smoothly, precisely and reliably
2) Relative humidity :<90. The machine operates smoothly with reliable precision.
3) Power supply: Power supply 380VAC(+/-105), 50Hz(+/-1Hz);
4) Hydraulic oil product: Anti-wear hydraulic oil M46 #;
5) Grounding method: The equipment must be reliably grounded.
Installation, commissioning, training and acceptance of the pipe end forming machine:
1) The buyer is responsible for unloading the equipment, hoisting it into position, and connecting the power supply to the equipment. The seller shall train the personnel arranged by the buyer, and the buyer shall assign relevant personnel to coordinate and cooperate. The auxiliary materials such as hydraulic oil used in the equipment shall be the responsibility of the buyer. The commissioning and installation time shall not exceed two working days.
2) The training will be conducted at the buyer's factory. The specific training contents are as follows:
2.1) Operator: Specific operation process, theoretical basic knowledge, and knowledge of safe operation and usage.
2.2) Maintenance personnel: Maintenance, lubrication, repair of equipment, and regular provision of vulnerable parts, etc
2.3) Process technicians: The formulation of pipe end forming processes and the design of pipe end forming molds.
3) Conduct acceptance inspection at the buyer's factory. The main projects are as follows:
3.1) Visual inspection of each device of the machine (visual inspection shows no deformation, rust spots, surface peeling, etc.)
3.2) Check the quantity and dimensions of each device on the list and whether the hydraulic oil has been added to the position for the test run oil.
3.3) The buyer shall assign relevant personnel to the seller's site for the initial training in combination with the pre-acceptance, and inspect the installation and commissioning conditions. After the commissioning is completed, the goods shall be dispatched after both parties confirm that the installation and commissioning are qualified. Conduct the final acceptance at the buyer's site and carry out secondary training
I Performance Characteristics:
The automatic hydraulic two-station pipe end forming machine adopts a microcomputer-controlled power system, and the setting and operation are simple and easy to understand.
The mobile foot switch has three functions: automatic, emergency stop and continuous stop after tight stop, with high safety.
According to requirements, various forming molds can be equipped to complete various pipe end shapes such as sheep head pipe reduction, pipe expansion, pleating and pipe.
The mold replacement is simple and convenient for elastic production.
The hydraulic system adopts a centralized control circuit of oil pressure valves, which can extend the service life of the components of each machine drive mechanism. The multi-stage mailbox design combined with the large-capacity water cooling circulation system makes the machine operate more stably.
The automatic hydraulic pipe end forming machine uses linear guides as the carrier, ensuring no wear during operation and good product repeatability. It is suitable for the treatment of piers in automotive parts, furniture, air conditioners, and fuel pipelines
The usage conditions and power supply part of the pipe end forming machine:
1) Ambient temperature :0-45 degrees. The machine operates smoothly, precisely and reliably
2) Relative humidity :<90. The machine operates smoothly with reliable precision.
3) Power supply: Power supply 380VAC(+/-105), 50Hz(+/-1Hz);
4) Hydraulic oil product: Anti-wear hydraulic oil M46 #;
5) Grounding method: The equipment must be reliably grounded.
Installation, commissioning, training and acceptance of the pipe end forming machine:
1) The buyer is responsible for unloading the equipment, hoisting it into position, and connecting the power supply to the equipment. The seller shall train the personnel arranged by the buyer, and the buyer shall assign relevant personnel to coordinate and cooperate. The auxiliary materials such as hydraulic oil used in the equipment shall be the responsibility of the buyer. The commissioning and installation time shall not exceed two working days.
2) The training will be conducted at the buyer's factory. The specific training contents are as follows:
2.1) Operator: Specific operation process, theoretical basic knowledge, and knowledge of safe operation and usage.
2.2) Maintenance personnel: Maintenance, lubrication, repair of equipment, and regular provision of vulnerable parts, etc
2.3) Process technicians: The formulation of pipe end forming processes and the design of pipe end forming molds.
3) Conduct acceptance inspection at the buyer's factory. The main projects are as follows:
3.1) Visual inspection of each device of the machine (visual inspection shows no deformation, rust spots, surface peeling, etc.)
3.2) Check the quantity and dimensions of each device on the list and whether the hydraulic oil has been added to the position for the test run oil.
3.3) The buyer shall assign relevant personnel to the seller's site for the initial training in combination with the pre-acceptance, and inspect the installation and commissioning conditions. After the commissioning is completed, the goods shall be dispatched after both parties confirm that the installation and commissioning are qualified. Conduct the final acceptance at the buyer's site and carry out secondary training
Technical support and after-sales service section of the pipe end forming machine:
Within one year after the delivery of the equipment, the seller provides free warranty service. During the warranty period, if the equipment malfunctions due to non-human factors, the seller will respond immediately upon receiving the purchase notice. If the problem cannot be directly resolved over the phone, someone will be dispatched to the site within 72 hours to provide all the necessary replacement parts and services free of charge. If the equipment malfunctions due to human factors, the seller will respond immediately upon receiving the buyer's notice. If the issue cannot be directly resolved over the phone, someone will be dispatched to the scene within two hours to provide all the parts and services that need to be replaced on a paid basis.
2) After the warranty period, if any malfunction occurs in the equipment, the seller shall respond immediately upon receiving the buyer's notice. If the problem cannot be directly resolved over the phone, the seller shall send personnel to the site within 72 hours and provide all the parts and services that need to be replaced on a paid basis.
3) We will provide extensive and excellent technical support for life (including the development of new processes, features of new equipment, consultation on advanced technologies, solutions to difficult problems, and software upgrades and replacements) as well as supply of spare parts.
Within one year after the delivery of the equipment, the seller provides free warranty service. During the warranty period, if the equipment malfunctions due to non-human factors, the seller will respond immediately upon receiving the purchase notice. If the problem cannot be directly resolved over the phone, someone will be dispatched to the site within 72 hours to provide all the necessary replacement parts and services free of charge. If the equipment malfunctions due to human factors, the seller will respond immediately upon receiving the buyer's notice. If the issue cannot be directly resolved over the phone, someone will be dispatched to the scene within two hours to provide all the parts and services that need to be replaced on a paid basis.
2) After the warranty period, if any malfunction occurs in the equipment, the seller shall respond immediately upon receiving the buyer's notice. If the problem cannot be directly resolved over the phone, the seller shall send personnel to the site within 72 hours and provide all the parts and services that need to be replaced on a paid basis.
3) We will provide extensive and excellent technical support for life (including the development of new processes, features of new equipment, consultation on advanced technologies, solutions to difficult problems, and software upgrades and replacements) as well as supply of spare parts.
Product details
